GE 29115 Series manual Registration, If you select 1YES, press the program/mute button. Hold

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be registered again unless absolutely necessary.

From the Handset Setup Menu:

1.Press the caller ID-volume ( 6 or 5) button to scroll to the REGISTRATION sub-menu.

2.Press the program/mute button to enter the menu. REGISTRATION 1YES42NO - - - shows in the display The default setting is 2NO.

3.Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume ( 6 or 5) button to scroll to 1YES or 2NO.

4.If you select 1YES, press the program/mute button. HOLD

BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET PROGRAM shows in the display. (Your handset should be held near the base during registration process.)

5.Press and hold the page button on the base unit, the charge/in use indicator flashes. Press the handset program/mute button. REGISTERING shows in the display. HANDSET X REGISTERED shows in the handset display, where X is the handset number. You may now rename your handset. (Refer to Step 3 & 4 of Handset Name Section)

39