Do Not Disturb
This feature allows you to turn off the base ringer and handset ringers for all handsets registered with the base unit. The answerer speaker will be silenced when the unit is receiving incoming messages.
Press the do not disturb button on the base. Handset will display DO NOT DISTURB.
NOTE: If DO NOT DISTURB is activated during an incoming ring, it will only be effective from the next incoming call.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local telephone company, you will receive Caller ID information (if available) on Call Waiting calls. During a phone call, you will hear a beep to indicate another call is waiting on the line and Caller ID information for the waiting call shows on the handset display.
•To connect to the waiting call, press the flash button on the handset, and your original call is put on hold.
•To switch between the two calls, press the flash button.
TIP: Do not press the TALK/CALL BACK button on the handset to activate a custom calling service, such as call waiting, or call will disconnect.
47
