1.Disconnect power from the base by pulling the plug out of the back of the unit.
2.Press and hold the page button and while holding the page button reconnect the power.
3.Continue to hold the page button until the charge/in use light flashes rapidly.
4.Release the page button.
5.Press and release the page button on the base once. All handsets are
Default Setting
As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.
From the Handset Setup Menu:
1.Press the caller
2.Press the program/mute button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. The default setting is 2NO.
3.Use the
42
