Installation Instructions
3ElECTRICAl ConnECTIonS (ConT.)
B.Usage Situations where Appliance Power Cord will Be Disconnected Frequently.
Do not use an adapter plug in these situations because disconnecting of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. The customer should have the
he installation of appliances designed for mobile
home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and
Electric Disconnect
nLocate disconnect plug on the range back.
nPinch sides of connector and pull out of range back.
5ASSEMBlE SURFACE BURnERS
Assemble the burners as shown.
Grate
Burner cap
Burner head
Electrode
Burner base
CAUTIon: Do not operate the burner without all burner parts in place.
The top sides of the Right Front, Right Rear and Left Front burner heads are marked with the letters “RF”, “RR” and “LF”, respectively, to aid assembly.
Medium head |
|
(not marked) | Small head |
and cap | and cap |
4SEAl THE oPEnInGS
Seal any openings in the wall behind the range and
in the floor under the range when hookups are completed.
LF | Front of |
| |
| range |
Large head and cap
RR
RF
Extra large head and cap
40
