Instructions
To maintain optimumperformance, clean the filters at leastevery 30 days.
Safety
Operating Instructions
Care and Cleaning
Troubleshooting Tips
Consumer Support
FRONT | FRONT |
Dirty | Clogged |
| reduces cooling, heating |
| and airflow. |
The most important thing you can do to maintain the Zoneline is to clean the filterat leastevery
30 days.Clogged filters reduce cooling, heating and air flow.
Keeping these filters clean will:■Decrease cost of operation.
■Save energy.
■Prevent clogged heat exchangercoils.
■Reduce the risk of premature component failure.
To clean the air filters:■Vacuum off the heavy soil.
■Run water through the filtersfrom the back side.
■Dry thoroughly before replacing.
NOTE: The air filters are interchangeable and will fit in either the right or left side.
2 Air filters
Pull up
To replace the air filters:Push down
CAUTION:Do not operate the Zoneline withoutthe filters in place. If a filter becomes torn or damaged, it should be replaced immediately.
Operating without the filters in place or with damaged filters will allow dirt and dust to reach the indoor coil and reduce the cooling, heating, airflow and efficiency of the unit.
Replacement filters are available fromyour salesperson, GE dealer, GE Service and Parts Center or authorized Customer Care® servicers.
10