|
|
| GEAppliances.com |
|
|
|
|
Problem | Possible Causes | What To Do | |
|
|
|
|
| The air is not always | The heat pump is not | • This is normal. The heat pump will producewarmair | |
| coolor hot during | producing hot air. | but not as hot as air produced when the | |
| operation |
|
| electric heat is used. |
|
|
|
|
| The Smart Fan Auxiliary | • This causes the fan to blow room temperature air | |
| Controls may be set to | even when the compressor or heater cycles off. | |
| continuous fan. | The continuous air movement provides better | |
|
|
| overall temperature control in the cool mode. |
|
|
| See Smart Fan – Cooling/Heating on page 5. |
|
|
| |
| The air does not feel | The heat pump alone | • Use the Electric Heat Option. This turns off the | |
| warm enough during | produces air that feels | heat pump and warms with electric heat only. | |
| heating operation | cooler than desired. | NOTE: Use of this option will result in increased energy | |
|
|
| consumption. |
|
|
| |
| The unit is not | The Smart Fan Auxiliary | • See Smart Fan – Cooling/Heating on page 5. | |
| blowing out air | Controls may be set to cycle. |
| |
|
|
| |
| The electric heating | The power cord is not | • Remove the room cabinet and make sure that the | |
| feature does not work | firmly attached. | yellow connector on the end of the power cord is | |
|
|
| firmly engaged. |
|
|
| |
| Temperaturedisplay | The compressor may | • Set the operation control to STOP and then restart | |
| flashes | have failed. | the unit. If the flashing light reappears within | |
|
|
| 30 minutes, call for service. |
|
|
|
|
21
Instructions Safety
Instructions Operating
Cleaning and Care
Tips Troubleshooting
Support Consumer