GE 960 Series manual Performa 960 FA Level I Programming Parameters

Table 5 -Performa 960 FA Level I Programming Parameters

	Parameter		Range of Values	Minimum	Default	Units of Measure	Notes
Name		Description		Increments
P1		Time of day	1:00 to 12:59	1	None	Hour: minute	Range depends on value selected
		AM or PM	00:00 to 23:59				for P13. Enter the current time.
			1:00 to 12:59				Range depends on value selected
		Time of day of					for P13. Skip this parameter to
P2			AM or PM	1	2:00 AM	Hour: minute
		regeneration					accept the default or enter a new
			00:00 to 23:59
							time.
			3 to 250	1	10	PPM	Unit of measure depends on value
P3		Factor A					selected for P12. Enter potassium
			30 to 2500	10	100	PPM x 10
							permanganate demand.
							Unit of measure depends on value
P4		Regenerant	0.5 to 99.5	0.5	6	Gallons x 10	selected for P12.
		Dosage	01 to 25.5	0.1	2.5	Liters x 10	Select regenerant dosage from
							Table 6 and enter that value.
							Unit of measure depends on value
P5		Capacity of Unit	0.1 to 140.0	0.1	1.0	PPM-gallons	selected for P12.
			0.01 to 14.00	0.01	0.1	PPM-liters	Enter the system capacity setting
							from Table 7.

Table 6 - Regenerant Dosage Settings (gallons x 10) for Various Size Iron Filters

Temperature			Filter Size/Cubic Feet of Manganese Greensand
	0.75 ft3	1.00 ft3	1.25 ft3	1.50 ft3	1.75 ft3	2.00 ft3	2.50 ft3	3.00 ft3	3.50 ft3
50°F	4.0	5.0	6.0	8.0	9.0	10.0	13.0	15.0	18.0
60°F	3.0	4.0	5.0	6.0	7.0	9.0	9.0	11.0	13.0
70°F	3.0	3.0	3.0	4.0	4.0	5.0	6.0	8.0	9.0

Table 7 - Capacity Settings for Various Size Iron Filters

Filter Size	0.75 ft3	1.00 ft3	1.25 ft3	1.50 ft3	1.75 ft3	2.00 ft3	2.50 ft3	3.00 ft3	3.50 ft3
Capacity Setting	7.5	10	12.5	15	17.5	20	25	30	35

14