ANSI X3.28/SRIO DPA
CONFIGURATION GUIDE GE Energy Services
Restricted A071-0CG-2.02-2
Full 5
NAME RANGE DESCRIPTION
Power-Up Delay 00 .. 65535 Delay (in seconds) after start-up before the ANSI X3.28/SRIO
DPA will begin responding to requests.
A typical value is 10.
DI Offset 00 .. DO Offset Offset (in words) to the start of the digital input table partition
within the ANSI table.
Normal setting is 00.
DO Offset 00 .. EV Offset Offset (in words) to the start of the digital output partition
within the ANSI table.
Normal setting is 500.
EV Offset 00 .. AI Offset Offset (in words) to the start of the event storage partition
within the ANSI table.
Normal setting is 750.
AI Offset 00 .. AO Offset Offset (in words) to the start of the analog input partition within
the ANSI table.
Normal setting is 1000.
AO Offset 00 .. PD Offset Offset (in words) to the start of the analog output partition
within the ANSI table.
Normal setting is 1500.
PD Offset 00 .. TM Offset Offset (in words) to the start of the parameter data partition
within the ANSI table.
Normal setting is 2000.
TM Offset 00 .. EVNT Offset Offset (in words) to the start of the time partition within the
ANSI table.
Normal setting is 2300.
EVNT Offset 00 .. DD Offset Offset (in words) to the start of the event partition within the
ANSI table.
Normal setting is 2400.
DD Offset 00 .. Sys Offset Offset (in words) to the start of the diagnostic data partition
within the ANSI table.
Normal setting is 2500.
SYS Offset 00 .. Obj Offset Offset (in words) to the start of the system partition within the
ANSI table.
Normal setting is 3000.
OBJ Offset 00 .. 27000 Offset (in words) to the start of the object partition within the
ANSI table.
Normal setting is 5000.
Spontaneous
Event Enable
No (00)
Yes (non-zero)
Indicates whether or not spontaneous events are to be reported
to the host.
A typical value is Yes.
Spontaneous Data
Enable
No (00)
Yes (non-zero)
Indicates whether of not spontaneous data is to be reported to
the host.
A typical value is Yes.
Store
Configuration
No (00)
Yes (non-zero)
Indicates whether or not the configuration should be stored.
A typical value is No.
Analog Format 32 Bit Binary (32) Format required by the host station for returned analogs.