GE AE1RD14DM, AE0CD10AM About the remote control, Operating, Instructions, Safety, Installation

Instructions

About the remote control.

The remote control transmits the signals to the system.

Features and appearance may vary.

Safety

Operating Instructions

Installation Instructions

Consumer Support Troubleshooting Tips

AUTO—In this mode, the unit automatically controls the room temperature within the range of 77ºF and 68ºF. The fan will run continuously while the unit is in AUTO mode. When the room temperature exceeds 77ºF, the unit will go into COOL Mode. When the room temperature drops to 73ºF, the fan will continue to run but COOL Mode will turn off. When the temperature drops below 68ºF, the unit will go into HEAT Mode. When the temperature reaches 73ºF, the fan will continue to run but HEAT Mode turns off. NOTE: This temperature range setting cannot be adjusted and will not be displayed.

COOL—Use to cool the room to the desired temperature set between 61ºF and 86ºF. NOTE: The unit will not provide optimum cooling if the outside temperature is below 60ºF. Under certain conditions, the unit may activate the antifreeze protection cycle for approximately 5 minutes to remove ice from the indoor coil.

DRY—Use to dehumidify the room. The fan will run at a fixed low speed to provide maximum dehumidification. The temperature can be set between 61ºF and 86ºF.

FAN—Use to turn ON and OFF the fan-only operation. COOL, HEAT or DRY mode will not be provided.

HEAT (on models so equipped)—Use to warm the room to the desired temperature set between 61ºF and 86ºF.

NOTE: The unit will not provide optimum heating if the outside temperature is below 14ºF. Under certain conditions, the unit may activate the antifreeze protection cycle for approximately 8 minutes to remove ice from the outdoor coil. During this cycle, it is normal to hear operating sounds such as refrigerant flowing inside the system.

Fan setting Operation

Mode	Sleep on
Temperature
	Swing on
Timer set
	Clock and timer
ON and OFF

4