| BECCO2200 DCA |
GE Energy Services | Configuration Guide |
☞NOTE: The actual number of Binary Output points required must be incremented by the number of Mode Download Pseudo Controls configured.
2.1.1 Binary Inputs
When communication is established with a device and valid data is returned for the binary input point, the point is turned on-line and communication OK. If communication between the device and the point fails, all binary input points associated with the device will be set off-line and communication failed.
2.1.2 Binary Outputs
On startup, all pseudo controls associated with a valid device and all Mode Download Pseudo Controls are placed on-line and communication OK. When communication is established with a device, the remaining binary outputs are set on-line and communication OK. If communication between the device and the points fails, all binary output points, excluding pseudo controls, will be set off-line and communication failed.
2.1.3 Counters
When communication is established with a device and valid data is returned for the counter, the point is turned on-line and communication OK. If communication between the device and the point fails, all counters associated with the device will be set off-line and communication failed.
2.1.4 Analog Inputs
When communication is established with a device and valid data is returned for the analog input point, the point is turned on-line and communication OK. If communication between the device and the point fails, all analog input points associated with the device will be set off-line and communication failed.
2.1.5 Analog Outputs
On startup, all analog outputs associated with a valid device are placed on-line and communication OK. If communication between the device and the point fails, all analog output points associated with the device will be set off-line and communication failed.
2.1.6 Device Status
When communication is established with a device, the device status point is set on-line and communication OK. If communication between the device and the point fails, the device status point will be set off-line and communication failed.
A164-0CG-1.00-2Restricted
