Safety Instructions

Installation of the range.

Seal the Openings

Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.

Operating Instructions

Assemble Surface Burners

Assemble the side burners as shown.

Side

Grate

Burner cap

Burner head and electrode

Place the burner caps on the cooktop. Make sure the caps are placed in the correct locations. There is one oval (center) head and cap asssembly. There is one small, one medium, one large and one extra large burner cap.

 

Oval head and cap

 

Medium burner

assembly

Small burner

 

head and cap

 

head and cap

Tips Installation Instructions

Assemble the center burner. Make sure that the locking feet on the center grate hook over the side grates.

Center Griddle

Burner head and

cap assembly

Electrode

CAUTION: Do not operate the burner without all burner parts in place.

 

Front of range

Large burner

Extra large burner

head and cap

head and cap

Make sure the slot in the burner head is positioned over the electrode.

Troubleshooting

Slot

Electrode

Consumer Support

Check Ignition of Surface Burners

Operation of all cooktop burners should be checked after the range and gas supply lines have been carefully checked for leaks.

Electric Ignition

Select a top burner knob and simultaneously push in and turn to LITE position. You will hear a clicking sound indicating proper operation of the spark module. Once the air has been purged from the supply lines, burners should light within 4 seconds. After burner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked.

50

Page 50
Image 50
GE J2B918 Operating Instructions, Seal the Openings, Assemble Surface Burners, Check Ignition of Surface Burners