GE JBP19 How to Set Delay Start of Cleaning on some models, Operating The Self-Cleaning Oven

OPERATING THE SELF-CLEANING OVEN

(continued)

How to Set Delay Start of Cleaning (on some models)

Quick Reminder:			A	5. Press the HOUR pad until 9:00 appears
				in the display. The timer is now set to
1. Latch the door.				start cleaning in 2 hours, at 9:00.
2. Turn the Oven Temperature Control knob to			HOUR	The Self-Clean Cycle will be set to
AUTO SELF CLEAN.				automatically begin at 9:00 and finish
3. Press the START TIME ON/OFF pad.			v	at 1 :20.
				Both the OVEN ON light and the
4. Press the HOUR and MIN. pads to set the
				LATCH DOOR light will flash when
time of day you want cleaning to start. The
				the clean time is finished.
Self-Clean Cycle will automatically begin
		6, When the LATCH DOOR light flashes, slide the
at the time you selected.	I
			latch handle to the left as far-as it will go, turn the
Delay Start is setting the oven timer to start the clean
			Oven Temperature knob to OFF and open the door.
cycle automatically at a later time than the present
		Never force the latch handle. Wait until the LATCH
time of day.
		DOOR light flashes and the latch slides easily.
For example: Let’s say it is 7:00 and you want the
		Forcing the latch handle may damage the door lock.
oven to begin self-cleaning at 9:00 after you’re
finished in-the kitchen. Th~ oven is just soiled a
normal amount so the normal Clean Time of 4 hours
and 20 minutes is preferred.

1.Follow steps to prepare the oven for cleaning.

2.Slide the latch handle to the

right as far as it will go. IL?y

Never force the latch

handle. Forcing the handle ~ will damage the door lock

mechanism.

3.Turn the Oven Temperature knob to the AUTO SELF CLEAN position.

nI ;;AF;T 4. Press the START TIME ON/OFF pad.

ON/OFF

24

—.