GE JBP19, JBP20, JBPA48 warranty Problem, Possible Cause, Do It Yourself section

Models: JBPA48 JBP20 JBP19

1 36
Download 36 pages 15.07 Kb
Page 33
Image 33
PROBLEM

PROBLEM

POSSIBLE CAUSE

 

 

 

THE DISPLAY GOES BLANK

Disconnect power to the range at the fuse box or circuit breaker for at least

OR INDICATOR LIGHTS

10 seconds. Turn power on and power up your range. If the indicator lights are

COME ON WHEN THE

still on, call for service.

RANGE IS NOT IN USE

 

 

 

 

OVEN WILL

Plug on range is not completely inserted in the electrical outlet.

NOT WORK

The circuit breaker in your house has been tripped, or a fuse has been blown.

 

 

 

 

Oven controls not properly set.

 

 

s Door left in locked position after cleaning.

 

 

 

 

 

OVEN LIGHT

Light bulb is loose or defective. Tighten or replace.

DOES NOT WORK

Switch operating oven light is broken. Call for service.

 

 

 

 

 

FOOD DOES NOT

The Oven Temperature knob not set at BROIL.

BROIL PROPERLY

c Door riot left open to the broil stop position as recommended.

 

 

 

 

Improper shelf position being used. See the Broiling Guide.

 

 

Food is being cooked on hot pan.

 

 

Cookware is not suited for broiling.

 

 

Aluminum foil used on the broil pan rack has not been fitted properly

 

 

and slit as recommended.

 

 

 

FOOD DOES NOT

. The Oven Temperature knob not set correctly.

ROAST OR BAKE

Shelf position is incorrect. See the Roasting or Baking sections.

PROPERLY

Oven shelf not level.

 

 

 

 

Incorrect cookware or cookware of improper size is being used.

 

 

A foil tent was not used when needed to slow down browning during roasting.

 

 

Oven thermostat needs adjustment. See the Adjust the Oven Thermostat–

 

 

Do 11 Yourself section.

 

 

 

OVEN TEMPERATURE

Oven thermostat needs adjustment. See the Adjust the Oven Thermostat–

TOO HOT OR TOO COLD

Do It Yourself section.

 

 

CLOCK AND TIMER

Make sure the electrical plug is plugged into a live, properly grounded

DO NOT WORK

power outlet.

 

 

Check for power outage.

 

 

See the Oven Control, Clock and Timer section of this guide.

 

 

SURFACE UNITS

Surface units are not plugged in solidly.

NOT FUNCTIONING

Drip pans are not set securely in the cooktop.

PROPERLY

@ Surface unit controls are not properly set.

 

 

 

 

 

33

Page 33
Image 33
GE JBP19, JBP20, JBPA48 warranty Problem, Possible Cause, Do It Yourself section