GE JBP20 The Problem Solver, Oven Will Not, to cool to room temperature and reset the controls

r●		THE PROBLEM SOLVER
o
A			(continued)
	PROBLEM		POSSIBLE CAUSE
	OVEN WILL NOT		● Oven temperature is too high to set self-clean operation. Allow the range
	SELF-CLEAN		to cool to room temperature and reset the controls.
			● Control knob riot set to AUTO SELF CLEAN.
			● Door latch handle not moved all the way to the right.
	OVEN DOOR		● Turn the Oven Temperature knob to OFF. Allow the oven to cool.
	ACCIDENTALLY LOCKED		Never force the door latch handle.
	DURING COOKING
	OVEN DOOR WILL		. Oven must cool below locking temperature.
	NOT UNLOCK
	OVEN NOT CLEAN		“ Oven controls not set properly.
	AFTER CLEAN CYCLE		● Heavily soiled ovens may need to self-clean again or for a longer period.
			. Heavy spillovers should be cleaned before starting clean cycle.
	LATCHDOOR		● The Oven Temperature knob is set at AUTO SELF CLEAN before the
	LIGHTFLASHES		door latch handle is moved to the right.
	OVEN DOOR		● Because the oven door is removable, it sometimes gets out of position during
	ISCROOKED		installation. To straighten the door, push down on the high corner.

If you need more help.. call, toll free: GE Answer Center”

800.626.2000

consumer information service

34