Instructions

Surface burner and grill modules.

Throughout this manual, features and appearance may vary from your model.

Care and Cleaning Operating Instructions Safety

Sealed Burner Module

To Install the Sealed Burner Module:

1.Make sure that all control knobs are set to OFF.

2.Clean the cooktop basin to remove any grease accumulation. See the Care and Cleaning the Cooktop section.

3.With the back of the burner module tilted up and the two round openings and three pins facing toward the front, insert the module in the cooktop basin.

To Remove the Sealed Burner Module:

1.Make sure that all control knobs are set to OFF and that the cooktop is cool.

2.Lift up the edge of the burner module until the bottom of the module clears the edge of the basin.

IMPORTANT: Do not lift the module too high while it is still connected—you could damage the ignitor rods and mixer tubes.

4.Slide the burner module forward until the pins start to engage the white slotted receptacle.

5.Lower the back of the module into place and carefully slide it forward until the pins are fully engaged.

6.Place the burner caps on the burners. Carefully place the grate onto the module with the two tabs on the underside toward the center of

the cooktop.

3.Hold the module by the sides and pull it away from the slotted receptacle and brass orifices. Lift it out of the basin when it is completely unplugged.

4.Do not store or stack modules where they could fall or be damaged.

NOTE: The optional sealed burner module JXGB90 can replace the grill burner assembly.

Grill Module

The grill consists of a black grill grate and the grill burner. Only install the grill on the left side of your cooktop.

Consumer Support Troubleshooting Tips

To Install the Grill Module:

1. Make sure that all control knobs are set to OFF.

2. Position the grill burner with the two round tubes and three pins facing the front.

3. Slide the grill burner forward until the pins and ignitors are engaged in the white slotted receptacle; then lower the burner until it rests on the mounting pins.

To Remove the Grill Module:

1.

Make sure that all control knobs are

 

set to OFF and all grill components

 

are cool.

2.

Remove the grill grate.

3.

Lift the grill burner up slightly and

 

pull it away from the white slotted

10

receptacle and brass orifices. Lift it out

of the basin when it is completely

unplugged.

4.Carefully place the grill grate on the cooktop. The grate is designed to fit one way only. See the illustration.

NOTE: Before using the grill for the first time, heat the grill burner to remove the protective shipping coating. Heat the grill burner on HI for 10 minutes and use the vent system to remove any additional smoke during cooling.

4.Do not store or stack modules where they could fall or be damaged.

NOTE: The optional sealed burner module JXGB90 can replace the grill burner assembly.

Page 9 Page 11
Page 10
Image 10
GE JGP990 manual Surface burner and grill modules, Grill Module
Page 9 Page 11

JGP990 specifications

The GE JGP990 is a high-performance gas range that stands out for its innovative features, robust construction, and impressive cooking capabilities. As part of General Electric's profile line, the JGP990 reflects the brand's legacy of quality and reliability while incorporating modern technologies that cater to the needs of today's home cooks.

At the forefront of the JGP990's features is its five-burner cooking surface, which includes a powerful 21,000 BTU tri-ring burner. This burner allows for versatile cooking techniques, from rapid boiling to gentle simmering. With multiple burner sizes, users can easily adjust the heat to accommodate various pot sizes and cooking methods. Furthermore, the continuous grates provide a seamless surface that allows for easy movement of pots and pans across the burners, enhancing convenience and efficiency.

In addition to its impressive burner options, the GE JGP990 is equipped with a built-in electric ignition system, providing reliable and easy start-up. This system eliminates the need for matches or lighters, allowing for a hassle-free cooking experience. The range also features heavy-duty cast iron grates that are not only durable but also add an element of professional-grade quality to the kitchen.

One of the standout features of the GE JGP990 is its integrated oven, which utilizes a powerful convection cooking system. This technology ensures even heat distribution, resulting in perfectly cooked meals, whether baking or roasting. The oven's self-cleaning mode simplifies maintenance, allowing users to spend less time scrubbing and more time enjoying their culinary creations.

The design of the JGP990 is equally impressive, available in stylish finishes that fit seamlessly into contemporary kitchens. The sleek stainless steel exterior not only enhances the aesthetic appeal but is also easy to clean, making it perfect for busy households.

Safety is paramount in the design of the GE JGP990, which includes features such as control lock and automatic shut-off. These elements provide peace of mind, especially for families with children.

Overall, the GE JGP990 gas range is a harmonious blend of power, versatility, and style, making it an ideal choice for both amateur cooks and professional chefs alike. Its cutting-edge features, reliable performance, and thoughtful design position it as a standout appliance in the ever-evolving culinary landscape.
Top Page Image Contents