![How to Set Oven for Cleaning](/images/new-backgrounds/66771/6677149x1.webp)
How to Set Oven for Cleaning
Easy Reference:
1.Press the AUTO SELF CLEAN pad.
2.Press the INCREASE or DECREASE pad until the desired Clean Time appears.
If the oven is too hot and you start to set a clean cycle, the word “OFF” will appear in the display. Allow additional time for cooling before you try to set the cycle.
1.Follow the directions in the Before a Clean Cycle section.
2.After closing the door, press the AUTO
AUTO SELF | SELF CLEAN pad. | |
CLEAN | ||
|
3.Press the INCREASE or DECREASE pad until the desired Clean Time is
displayed.
Clean Time is normally 3 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.
The
4.When the LOCK light is off, open the door.
NOTE:
| • You can find out when the clean cycle |
STOP | will be finished by pressing the STOP |
TIME | TIME pad. |
•The word “clean” will be displayed, the word “DOOR” will flash and oven control will signal if you set the clean cycle and forget to close the oven door.
•A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run after the oven is turned off.
Operating the Self-
To Stop a Clean Cycle
1. Press the CLEAR/OFF pad. | 2. When the LOCK light goes off, indicating that the |
CLEAR | oven has cooled below the locking temperature, |
OFF | open the door. |
| (continued next page) |
25