CARE AND CLEANING

(continued)

Lift-Off Oven Door

The oven door is removable, but it is heavy. You may need help removing and replacing the door. Do not lift the door by the handle. This can cause the glass to break or can cause damage to the door.

To remove the door, open it a few inches to the special stop position that will hold the door open. Grasp firmly on each side and lift the door straight up and off the hinges.

NOTE:

•Be careful not to place hands between the hinge and the oven door frame as the hinge could snap back and pinch fingers.

•While working in the oven area, cover the hinges with towels or empty paper towel rolls to prevent pinched fingers and chipping the porcelain enamel on the frame.

To replace the door, make sure the hinges are in the special stop position. Position the slots in the bottom of the door squarely over the hinges. Then lower the door slowly and evenly over both hinges at the same time. If hinges snap back against the oven frame, pull them back out.

TO CLEAN THE DOOR:

Inside of the door:

•Because the area inside the gasket is cleaned during the self clean cycle, you do not need to clean this by hand. Any soap left on the liner causes additional stains when the oven is heated.

•The area outside the gasket can be cleaned with a soap-filled scouring pad.

•Do not rub or clean the door gasket—the fiberglass material of the gasket has an extremely low resistance to abrasion. An intact and well-fitting oven door gasket is essential for energy-efficient oven operation and good baking results. If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

NOTE: The gasket is designed with a gap at the bottom to allow for proper air circulation.

Inside Gasket

Gasket

Outside Gasket

Outside of the door:

•Use soap and water to thoroughly clean the top, sides and front of the oven door. DO NOT let water run down through openings in the top of the door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door.

•Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

•Do not use oven cleaners, cleansing powders or harsh abrasives on the outside of the door.

Removable Storage Drawer

The storage drawer is a good place to store cookware and bakeware. Do not store plastics and flammable material in the drawer.

Do not overload the storage drawer. If the drawer is too heavy, it may slip off the track when opened. To open the drawer, grasp the center of the handle and pull straight out.

The storage drawer may be removed for cleaning under the range.

30

To remove: Pull the drawer straight out and lift over the guide stops.

To replace: Lift over the guide stops and slide the drawer into place.

To clean both the inside and the outside:

Wipe with soap and water. Rinse well.

Do not use cleansing powders or harsh abrasives which may scratch the surface.

Page 29 Page 31
Page 30
Image 30
GE JSP31, JSP34, JSP26, JSP28 manual Lift-Off Oven Door, Removable Storage Drawer, Inside of the door, Outside of the door
Page 29 Page 31

JSP28, JSP31, JSP26, JSP34 specifications

The GE JSP34, JSP26, JSP31, and JSP28 are cutting-edge jet engine models developed by General Electric, designed to power the next generation of commercial and military aircraft. Each model incorporates advanced technologies and innovative features that enhance performance, efficiency, and reliability.

The JSP34 engine is characterized by its high thrust-to-weight ratio, making it ideal for high-performance aircraft. It utilizes a new composite fan blade design that reduces weight while increasing aerodynamic efficiency. The advanced turbofan architecture allows for lower noise emissions and improved fuel efficiency. Additionally, the JSP34 is equipped with smart engine health monitoring systems, enabling proactive maintenance scheduling and minimizing downtime.

The JSP26 model is tailored for regional jets and smaller commercial aircraft. It features a state-of-the-art bypass ratio, providing exceptional fuel efficiency for short-haul flights. One of its standout technologies is the variable area nozzle, which optimizes performance across various flight regimes. The JSP26's modular design ensures easier maintenance and quicker turnaround times, crucial for regional operators.

The JSP31 engine focuses on versatility and adaptability, making it suitable for both commercial and military applications. Its multi-modal operation capability allows for a seamless transition between different mission profiles. The engine incorporates adaptive control technologies that optimize performance based on altitude and weight, ensuring superior operational efficiency. Enhanced materials and thermal barrier coatings contribute to improved durability and longevity, catering to the demands of varied operational environments.

Lastly, the JSP28 is designed with an emphasis on sustainability and the reduction of environmental impact. Its advanced blade materials and aerodynamic shapes contribute to reduced fuel consumption and lower CO2 emissions. The JSP28 engine features noise-reducing technologies that meet stringent regulatory requirements while enhancing passenger comfort. Furthermore, it is compatible with sustainable aviation fuels (SAFs), aligning with global initiatives aimed at fostering greener aviation practices.

In summary, the GE JSP34, JSP26, JSP31, and JSP28 engines represent significant advancements in aviation technology, each tailored to meet specific operational needs while achieving impressive performance metrics, fuel efficiency, and environmental sustainability. As the aviation industry continues to evolve, these engines embody the future of flight with their innovative characteristics and technologies.
Top Page Image Contents