GE JTP14, JTP13 warranty Problem, Possibi.E Cause

PROBLEM	POSSIBI.E CAUSE
“F-AND A NUMBER”	● This is function error code. Press the CLEAWOFF pad. Allow the oven to cool
FLASH IN THE DISPLAY	one hour. Place the oven back into operation. If function error occurs again,
	disconnect power to the oven and call for service.
OVEN WILL NOT WORK	● The circuit breaker in your house has been tripped, or a fuse has been blown.
	● The oven controls are not properly set.
OVEN LIGHT	● The light bulb is loose or defective. Tighten or replace.
DOES NOT WORK	● The switch operating the oven light is broken. Call for service.
FOOD DOES NOT	● Oven controls not set properly. See the Broiling section.
BROIL PROPERLY	● Door not left open to the broil stop position as recommended.
	● Improper shelf position being used. See the Broiling Guide.
	● Food is being cooked on a hot pan.
	● Cookware is not suitable for broiling.
	● Low voltage. See the Broiling section.
	● Aluminum foil used on the broiler pan and rack has not been fitted properly
	and slit as recommended.
FOOD DOES NOT ROAST	● Oven controls not set properly. See the Baking or Roasting section.
OR BAKE PROPERLY	● Shelf position is incorrect. See the Roasting or Baking section.
	● Incorrect cookware or cookware of improper size is being used.
	● Oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
	D() It Yol{r,~e~section.
OVEN WILL NOT	● Oven temperature is too high to set self-clean operation.
SELF-CLEAN	Allow the oven to cool to room temperature and reset the controls.
DOOR WILL NOT OPEN	● When the temperature has fallen below the locking temperature
AFTER SELF-CLEAN CYCLE	door can be opened.
CONTROL SIGNALS AFTER	● This is reminding you to enter a bake temperature.
ENTERING COOK TIME
OR STOP TIME
OVEN TEMPERATURE	● Oven thermostat needs adjustment. See the Adjust the Oven Therrnostat—
TOO HOT OR TOO COLD	D() Jt H) L{r,self section.
“BURNING” OR “OILY”	● This is normal in a new oven and will disappear in time. To speed the process,
ODOR EMITTING FROM	set a self-clean cycle for a minimum of 3 hours. See the Operating the Self-
OVEN WHEN TURNED ON	Cleaning Oven section.
STRONG ODOR	● An odor from the insulation around the inside of the oven is normal for the
	first few times the oven is used. This is temporary.

25