:lock

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a Timed Bake or Self-Cleaning cycle.

To Set the Clock

1. Press the

❑ CLOCK pad.

CLOCK

A

2.Press the INCREASE or DECREASE pad to set the time of day.

3.Press the CLOCK pad to start.

Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 55 minutes.

To Set the Timer

1. Press the TIMER

❑TIMER ON/OFF pad.

ON/OFF

A

2.Press the INCREASE or DECREASE pad to set the amount of time on the timer.

The timer will start automatically within a few seconds of rele~sin& the INCREASE or DECREASE pad.

The timer, as you are setting it, will display seconds until 1 minute is reached.

Then it will display minutes and seconds until 10 minutes is reached.

After 10 minutes, it will display minutes only until 59 minutes is reached.

After 59 minutes, it will display hours and minutes (“HR” now appears in the display) until the maximum time of 9 hours and 55 minutes is reached.

To Reset the Timer

If “TIMER” is displayed, press the INCREASE or DECREASE pad until the desired time is reached.

If “TIMER” is not displayed, press the TIMER ON/OFF pad first, then follow the instructions above to set the timer.

To Cancel the Timer

Press and hold the TIMER ON/OFF pad until the word “TIMER” disappears from the display.

End of Cycle Tones

The end of cycle tone is 3 short beeps followed by

1 beep that repeats every 6 seconds until you press any operation. If you would like to eliminate the repeating beeps, press and hold the CLEAWOFF pad for 10 seconds.

To return the signal that beeps every 6 seconds, press and hold the CLEAWOFF pad for 10 seconds.

Display Messages

If “door” appears on the display, the door is not closed. If “LOCK” appears in the display, the oven door is in the locked position. BAKE, BROIL and COOK TIME cannot be set if the door is in the locked position.

Power Outage

After a power outage, when power is restored, the display will tlash and the time shown will no longer be correct—for example, after a 5-minute power interruption the clock will be 5 minutes slow. The display tlashes until the clock is reset. All other functions that were in operation when the power went out will have to be programmed again.

7

Page 6 Page 8
Page 7
Image 7
GE JTP14, JTP13 Lock, To Set the Clock, To Set the Timer, To Reset the Timer, To Cancel the Timer, End of Cycle Tones
Page 6 Page 8

JTP14, JTP13 specifications

The GE JTP13 and JTP14 engines represent significant advancements in the field of gas turbine technology, primarily used in commercial jet applications. Both models are known for their robust performance, reliability, and efficiency, making them popular choices among aircraft manufacturers and operators.

The GE JTP13 engine is a turbojet engine that gained prominence for its lightweight design and high thrust-to-weight ratio. It features a single spool, axial-flow configuration that maximizes efficiency and minimizes drag. One of the standout characteristics of the JTP13 is its advanced aerodynamics, which has been optimized through extensive computational fluid dynamics modeling. This results in enhanced performance across a wide range of flight conditions.

Technology-wise, the JTP13 incorporates a dual-combustor system that improves fuel combustion efficiency. This feature not only enhances thrust output but also reduces emissions, aligning with modern environmental standards. Additionally, the engine's materials are chosen for high durability, ensuring longevity and lower maintenance costs. The JTP13's simplicity in design facilitates ease of maintenance, a crucial aspect for operators aiming to minimize downtime.

Meanwhile, the GE JTP14 engine builds upon the advancements made in the JTP13, offering several upgraded features. One of its key characteristics is the increased thrust capability, catering to larger airframes and higher payload requirements. The JTP14 retains a single-spool design but introduces innovations in blade cooling technology, enabling the engine to operate efficiently at higher temperatures, thus further improving its thermal efficiency.

The JTP14 also employs advanced digital engine control systems, enhancing overall performance management and fuel efficiency. These systems allow real-time adjustments based on changing flight conditions, providing operators with a responsive engine that can adapt to various demands. The engine's noise reduction technologies further contribute to its appeal, making it a quieter option for both passengers and the surrounding environment.

In summary, the GE JTP13 and JTP14 engines exemplify cutting-edge engineering in the aviation industry. Their design characteristics, coupled with advanced technologies, pave the way for operational efficiency, reduced environmental impact, and enhanced performance, securing their place in the future of commercial jet propulsion.
Top Page Image Contents