GE JVM2052 manual

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT – Save these

instructions for local inspector’s use.

•IMPORTANT – Observe all

governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical and electrical skills.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

MFL57007101

49-40587-1

07-09 JR

Contents

Note to Installer – Note to Consumer – CONTENTS Page OUTSIDE TOP EXHAUST (EXAMPLE ONLY) OUTSIDE BACK EXHAUST (EXAMPLE ONLY) Exhaust connection: Maximum duct length: Elbows, transitions, wall and roof caps, etc HARDWARE PACKET ADDITIONAL PARTS Page AREMOVING THE MICROWAVE OVEN FROM THE CARTON/ REMOVING THE MOUNTING PLATE B FINDING THE WALL STUDS C DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET D ALIGNING THE WALL PLATE (Choose A, B or C) OUTSIDE TOP EXHAUST OUTSIDE BACK EXHAUST (VERTICAL DUCT) (HORIZONTAL DUCT) (Vertical Duct) INSTALLATION OVERVIEW A1 ATTACH THE MOUNTING PLATE TO THE WALL A2 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET A3 ATTACH EXHAUST DAMPER A4 MOUNT THE MICROWAVE OVEN A4 MOUNT THE MICROWAVE OVEN (cont.) (Horizontal Duct) B1 PREPARE THE REAR WALL FOR OUTSIDE BACK EXHAUST B2 ATTACH THE MOUNTING PLATE TO THE WALL B3 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET B4 ADAPT MICROWAVE OVEN BLOWER FOR OUTSIDE BACK EXHAUST B4 ADAPT MICROWAVE OVEN BLOWER FOR OUTSIDE BACK EXHAUST (cont.) B5 MOUNT THE MICROWAVE OVEN C1 ATTACH THE MOUNTING PLATE TO THE WALL C2 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET C3 ADAPT MICROWAVE OVEN BLOWER FOR RECIRCULATION C4 MOUNT THE MICROWAVE OVEN C5 INSTALLING THE CHARCOAL FILTER