Installation Instructions
A OUTSIDE TOP EXHAUST (Vertical Duct)
INSTALLATION OVERVIEW
A1. Attach Mounting Plate to Wall
A2. Prepare Top Cabinet
A3. Attach Exhaust Damper
A4. Mount Microwave Oven
A1 ATTACH THE MOUNTING PLATE TO THE WALL
Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud.
1Remove the toggle wings from the bolts.
2Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach the toggle wings to 3⁄ 4″ onto each bolt .
|
|
|
|
|
|
| Spacing for Toggles |
|
|
|
|
|
|
| More Than Wall |
|
|
|
|
|
|
| Thickness |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Mounting |
|
|
|
| Toggle Wings | ||
|
|
|
|
|
| Toggle | |
Plate |
|
|
|
|
|
| Bolt |
Wall
Bolt End
3Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate.
NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting plate touch
the bottom of the cabinet when pushed flush against the wall and that the plate is properly centered under the cabinet .
CAUTION:Be careful to avoid pinching fingers between the back of the mounting plate and the wall.
4Tighten all bolts. Pull the plate away from the wall to help tighten the bolts.
12