GE JVM2052 A4 MOUNT THE MICROWAVE OVEN (cont.)

Installation Instructions

A4 MOUNT THE MICROWAVE OVEN (cont.)

Damper

4Use the power supply cord clamp to bundle the power supply cord. Install the power supply cord clamp, using a screw as shown, to the inside of the cabinet.

Cabinet Front

Cabinet Bottom Shelf

Filler Block

Equivalent to Depth of Cabinet Recess

Self-Aligning Screw

Microwave Oven Top

5Attach the microwave oven to the top cabinet.

6Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw.

7Tighten the two screws to the top of the microwave oven. (While tightening screws, hold the microwave oven in place against the wall and the top cabinet.)

8Install grease filter. See the Owner’s Manual packed with the microwave oven.

14

Contents

Note to Installer – Note to Consumer – CONTENTS Page OUTSIDE TOP EXHAUST (EXAMPLE ONLY) OUTSIDE BACK EXHAUST (EXAMPLE ONLY) Exhaust connection: Maximum duct length: Elbows, transitions, wall and roof caps, etc HARDWARE PACKET ADDITIONAL PARTS Page AREMOVING THE MICROWAVE OVEN FROM THE CARTON/ REMOVING THE MOUNTING PLATE B FINDING THE WALL STUDS C DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET D ALIGNING THE WALL PLATE (Choose A, B or C) OUTSIDE TOP EXHAUST OUTSIDE BACK EXHAUST (VERTICAL DUCT) (HORIZONTAL DUCT) (Vertical Duct) INSTALLATION OVERVIEW A1 ATTACH THE MOUNTING PLATE TO THE WALL A2 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET A3 ATTACH EXHAUST DAMPER A4 MOUNT THE MICROWAVE OVEN A4 MOUNT THE MICROWAVE OVEN (cont.) (Horizontal Duct) B1 PREPARE THE REAR WALL FOR OUTSIDE BACK EXHAUST B2 ATTACH THE MOUNTING PLATE TO THE WALL B3 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET B4 ADAPT MICROWAVE OVEN BLOWER FOR OUTSIDE BACK EXHAUST B4 ADAPT MICROWAVE OVEN BLOWER FOR OUTSIDE BACK EXHAUST (cont.) B5 MOUNT THE MICROWAVE OVEN C1 ATTACH THE MOUNTING PLATE TO THE WALL C2 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET C3 ADAPT MICROWAVE OVEN BLOWER FOR RECIRCULATION C4 MOUNT THE MICROWAVE OVEN C5 INSTALLING THE CHARCOAL FILTER