Installation Instructions
DAMAGE – SHIPMENT/ INSTALLATION
•If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or replacement.
•If the unit is damaged by the customer, repair or replacement is the responsibility of the customer.
•If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by arrangement between customer and installer.
PARTS INCLUDED
HARDWARE PACKET
PART | QUANTITY |
Lag Screws (1⁄4" x 2") | 4 |
(for wall stud holes) |
|
Toggle Bolts (1⁄4" x 3") | 4 |
(for drywall holes) |
|
Spring Toggle Heads | 4 |
(for toggle bolts) |
|
Bolts | 2 |
(for securing to |
|
the upper cabinet) |
|
Tapping Screws (1⁄8"x 1⁄2") | 1 black |
(for attaching the | 2 bronze |
damper duct connector) |
|
Power Cord Clamp and | 1 |
| |
Screw (to hold |
|
the power cord) |
|
You will find the installation hardware contained in a packet with the unit. Check to make sure you have all these parts.
NOTE: Some extra parts are included.
NOTE: You need to install at least two lag screws into a 2" x 4" stud and four anchor bolts into the wall. Also, the mounting area must meet the 150 lbs. weight requirement.
PARTS INCLUDED
ADDITIONAL PARTS
PART | QUANTITY |
Upper Cabinet | 1 |
Template |
|
Rear Wall | 1 |
Template |
|
(3 pieces |
|
mounting |
|
plate only) |
|
Installation | 1 |
Instructions |
|
|
| Exhaust | 1 |
|
| ||
|
| Adapter |
|
|
|
|
|
|
|
|
|
|
| Damper | 1 |
|
|
|
|
|
| Power Cord | 1 |
|
| Clamp Bushing |
|
|
| (for the cord |
|
|
| hole in a metal |
|
|
| upper cabinet) |
|
6