Installation Instructions

C4 MOUNT THE MICROWAVE OVEN

CAUTION:To avoid the risk of personal injury (back injury or other injuries due to excessive weight of the microwave oven) or property damage, you will need two people to install this microwave oven.

IMPORTANT: Do not grip or use handle during installation.

WARNING:Risk of Electric Shock.

Can cause injury or death: If installing unit with metal countertops, cover the edge of the power supply cord hole with the power supply cord bushing.

IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws.

NOTE: When mounting the

 

 

microwave oven, thread

 

 

power cord through hole

 

 

in bottom of top cabinet.

 

 

Keep it tight throughout

 

 

Steps 1–3. Do not pinch

1

Lift microwave oven,

cord or lift oven by pulling

 

tilt it forward, and hook

cord.

 

 

slots at back bottom

 

 

 

 

edge onto four lower

 

 

tabs of mounting plate.

2Rotate front of oven up

against cabinet bottom.

3Insert a self-aligning screw through top center cabinet hole. Temporarily secure the oven by turning the screw at least two full turns after the threads have engaged. (It will be completely tightened later.)

Damper

4Use the power supply cord clamp to bundle the power supply cord. Install the power supply cord clamp, using a screw as shown, to the inside of the cabinet.

Cabinet Front

Cabinet Bottom Shelf

Filler Block

Equivalent to Depth of Cabinet Recess

Self-Aligning Screw

Microwave Oven Top

5Attach the microwave oven to the top cabinet.

6Insert 2 self-aligning screws through outer top cabinet holes. Turn two full turns on each screw.

7Tighten the two screws to the top of the microwave oven. (While tightening screws, hold the microwave oven in place against the wall and the top cabinet.)

8Install grease filter. See the Owner’s Manual packed with the microwave oven.

21