GE JVM2052 (Horizontal Duct), B1 PREPARE THE REAR WALL, FOR OUTSIDE BACK EXHAUST, INSTALLATION OVERVIEW

1 24

Installation Instructions

B OUTSIDE BACK EXHAUST (Horizontal Duct)

INSTALLATION OVERVIEW

B1. Prepare Rear Wall

B2. Attach Mounting Plate to Wall

B3. Prepare Top Cabinet

B4. Adjust Blower

B5. Mount the Microwave Oven

You need to cut an opening in the rear wall for outside exhaust.

•Read the instructions on the REAR WALL TEMPLATE.

•Tape it to the rear wall, lining up with the holes previously drilled for holes A and B in the wall plate.

•Cut the opening, following the instructions of the

REAR WALL TEMPLATE.

Contents

Note to Installer – Note to Consumer – CONTENTS Page OUTSIDE TOP EXHAUST (EXAMPLE ONLY) OUTSIDE BACK EXHAUST (EXAMPLE ONLY) Exhaust connection: Maximum duct length: Elbows, transitions, wall and roof caps, etc HARDWARE PACKET ADDITIONAL PARTS Page AREMOVING THE MICROWAVE OVEN FROM THE CARTON/ REMOVING THE MOUNTING PLATE B FINDING THE WALL STUDS C DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET D ALIGNING THE WALL PLATE (Choose A, B or C) OUTSIDE TOP EXHAUST OUTSIDE BACK EXHAUST (VERTICAL DUCT) (HORIZONTAL DUCT) (Vertical Duct) INSTALLATION OVERVIEW A1 ATTACH THE MOUNTING PLATE TO THE WALL A2 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET A3 ATTACH EXHAUST DAMPER A4 MOUNT THE MICROWAVE OVEN A4 MOUNT THE MICROWAVE OVEN (cont.) (Horizontal Duct) B1 PREPARE THE REAR WALL FOR OUTSIDE BACK EXHAUST B2 ATTACH THE MOUNTING PLATE TO THE WALL B3 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET B4 ADAPT MICROWAVE OVEN BLOWER FOR OUTSIDE BACK EXHAUST B4 ADAPT MICROWAVE OVEN BLOWER FOR OUTSIDE BACK EXHAUST (cont.) B5 MOUNT THE MICROWAVE OVEN C1 ATTACH THE MOUNTING PLATE TO THE WALL C2 USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET C3 ADAPT MICROWAVE OVEN BLOWER FOR RECIRCULATION C4 MOUNT THE MICROWAVE OVEN C5 INSTALLING THE CHARCOAL FILTER