Installation Instructions

C3 ADAPT MICROWAVE OVEN BLOWER FOR RECIRCULATION

1Remove and save 3 blower plate screws and 2 blower unit mounting screws.

Blower plate mounting screw (3 screws)

Blower plate

Blower unit

Back plate

Blower unit mounting screw (2 screws)

2Carefully pull out the blower unit. The wires

will extend far enough to allow you to adjust the blower unit.

3Roll the blower unit 90° so that fan blade openings are facing toward the front of the microwave oven.

BEFORE: Fan Blade

Openings Facing Up

Roll

AFTER: Fan Blade

Openings Facing

Forward

NOTE: Make sure wires remain routed in the grooves of the motor frame.

4Place the blower unit back into the opening.

WARNING:Risk of electric shock can cause injury or death. Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched.

5Reattach the blower plate to the microwave oven. Attach with the 3 blower plate mounting screws and then the 2 blower unit mounting screws.

Blower plate mounting screw (3 screws)

Blower plate

Blower unit

Back plate

Blower unit mounting screw (2 screws)

20