GE PGS968 Instructions Operating, Stainless Steel Surfaces on some models, Painted Surfaces

ge.com (U.S.) www.GEAppliances.ca (Canada)

Stainless Steel Surfaces (on some models)

Safety

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface,

use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.

To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer or Mabe Parts Store nearest you, please call our toll-free number:

National Parts Center 1.800.626.2002 (U.S.) 1.800.661.1616 (Canada)

ge.com (U.S.) www.GEAppliances.ca (Canada)

Instructions Operating

Painted Surfaces

	Painted surfaces include the top and	Do not use commercial oven cleaners,
	sides of the door, and the drawer front.	cleaning powders, steel wool or harsh
	Clean these with soap and water or	abrasives on any painted surface.
	a vinegar and water solution.
	Oven Vent
	The oven is vented through an opening	prevent the oven vent from working
	in the cooktop under the grille.	properly.
Center vent	Never cover the opening with aluminum
	foil or any other material. This would

Control Panel

If desired, the touch pads may be turned off	You may also use a glass cleaner.
before cleaning.	Remove heavier soil with warm soapy
See the Control Lockout section.
	water. Do not use abrasives of any kind.
Clean up splatters with a damp cloth.	Turn on the touch pads after cleaning.

Oven floor	Removable Oven Floor
	To remove the oven floor for easier	Clean the oven floor with warm
	cleaning:	soapy water.

Remove the oven door using the	IMPORTANT: Always replace the
instructions in the Lift-Off Oven Door	removable floor before the next use.
section.
Grasp oven floor at the rear finger
slots on each side, lift it up, push it
back and pull it out.

35

Instructions Care and Cleaning Troubleshooting Tips Consumer Support