QUICKSTART GUIDE
QS.6 UR Switch Module Firmware Updates
QS.6.1 Updating UR Switch Module Firmware
This section describes the process for upgrading firmware on a
There are several ways of updating Firmware on a UR Switch Module: EnerVista UR Setup software, Serial using the UR Switch Module’s Console port, tftp or through ftp. It’s highly recommended to use EnerVista UR Setup software to upgrade Firmware on a UR Switch Module.
Firmware upgrade using serial, TFTP, and FTP, are described in the UR Switch Module manual.
NOTE
QS.6.2 Selecting the Proper Version
The latest version of the firmware is available as a download from the GE Multilin web site.
To determine the version of firmware currently installed on your Switch, proceed as follows:
ZUsing the EnerVista web interface, log into the Switch using the procedure described earlier. The firmware version installed on the switch will appear on the lower left corner of the screen.
Version: 2.1beta 
ZUsing the EnerVista UR Setup program, select Settings > Product Setup > Communications > Ethernet Switch > Firmware Upload. The following popup screen will appear warning that the settings will be lost when the firmware is upgraded.
UR SWITCH MODULE – QUICKSTART GUIDE |
