Installation Instructions
A
Cutout for 27″ (68.6 cm) Double Built-In
Ovens only
For JKP35, JKP55, JKP75, PK956, ZEK958 models only.
Allow 1” (2.5 cm) for overlap of oven over side edges of cutout 
2” x 4”
(5 cm x 10 cm) or equivalent runners
20” (50.8 cm)
Allow a minimum of 20” (50.8 cm) for clearance to adjacent corners, drawers, walls, etc. when door is open
|
| 5” |
|
| (12.7 cm) |
|
| Max. from |
|
| the left or |
Cabinet | right | |
Width | side | |
| 27” |
|
(68.6 cm) | Junction Box | |
| Cutout | |
| Location | |
| Width | |
|
| |
25” (63.5 cm) Min.
25 1/4”
(64.1 cm) Max.
44”
(111.8 cm)
Min.
Cutout Above
Height base rail 49 11/16”
(126.2 cm) Min.
50 1/8”
(127.3 cm) Max.
| Allo | w 1” | Recommended | ||||||
| (2.5 cm) for |
|
| cutout location | |||||
|
| overlap | of | oven |
| from floor 13 1/4” | |||
|
|
|
| ||||||
| to | p | and | b | ottom |
| (33.7 cm) | ||
|
|
|
| ||||||
| of | cutout |
|
|
| ||||
Cabinet Width | 27” (68.6 cm) | |
Recommended |
|
|
Cutout Location |
|
|
from Floor | 13 | 1/4” (33.7 cm) |
Cutout Depth | 23 | 5/8” (60 cm) Min. |
Cutout Width | 25” (63.5 cm) Min. | |
| 25 | 1/4” (64.1 cm) Max. |
Cutout Height | 49 | 11/16” (126.2 cm) Min. |
| 50 | 1/8” (127.3 cm) Max. |
NOTE: If the cabinet does not have a front frame and the sides are less than 3/4”
(1.9 cm) thick, shim both sides equally to establish the cutout width.
If the cabinet does not have a solid bottom, two braces or runners must be installed to support the weight of the oven. For double ovens, the runners and braces must support 300 lbs (135 Kg).
NOTE: If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered.
Suitable
Bracing to Support Runners
C |
L |
18”
(45.7 cm)
Over Centerline
of Cabinet
2” x 4”
(5 cm x 10 cm) or equivalent runners level with bottom of cutout
5
