GE r08654v-1 installation instructions Pre-Installation Checklist, Installation Instructions

Installation Instructions

Pre-Installation Checklist

ALL INSTALLATION INFORMATION ON THE FOLLOWING PAGES IS TO BE USED FOR SINGLE AND DOUBLE OVEN INSTALLATION!

Remove packaging materials. Check behind hinges and under false bottom. Remove labels on the outside of the door, plastic on trims and panel, all tape around the oven, and any shipping screws securing the oven to the base pad.

Door removal is not a requirement for installation of the product, but is an added convenience. To remove the door:

Open the oven door as far as it will go.

Push both hinge	Hinge
locks down toward	Unlocked
	Position
the door frame,	Hinge
to the unlocked	Slot
position. This may
require a flat blade	Hinge
screwdriver.
	Arm

DO NOT LIFT THE DOOR

BY THE HANDLE!

Oven Racks

	EASY
EASY	INSTALLATIONINSTALL	TIOOFNYOUR NEW
	30"
	30" WALLWALLOVENOF
		OVENYOUR NEW

Literature

Pack

Open oven door and remove literature pack and oven racks.

Remove Installation Instructions from literature pack and read them carefully before you begin.

Be sure to place all literature, Owner’s Manual, Installations, etc. in a safe place for future reference.

Place hands on both sides of the door, and close the oven door to the removal position, which is most of the way closed.

Lift door up and out until the hinge arms clear the slots.

Hinge Clears Slot

NOTE: The oven door is very heavy. Be sure you have a firm grip before lifting the oven door off the hinges. Use caution once the door is removed. Do not lay the door on its handle. This could cause dents or scratches.

Place the oven on a table or platform even with the cutout opening. (Platform must support 150 lbs. [68 Kg] single, 275 lbs. [124 Kg] double.)

Remove the bottom trim from the top

of the oven. It will be installed at the end of the installation process. The trim is wrapped separately and taped to

the top of the unit.

3