Cabinetry
A
Cutout for 27″ (68.6 cm) Single or
Double
For JKS10, JKP30, JKP35, JKP55, JKP70, JKP75, PK916, PK956, ZEK938, ZEK958 models only.
Single 27″ (68.6 cm) | Double 27″ (68.6 cm) |
Oven Over | Oven Over |
a Warming Drawer | a Warming Drawer |
| |
Against Rear | |
Wall Per | |
Rear Wall Per Warming | Warming |
Drawer Requirement | Drawer |
2” (5.1 cm) | Requirement |
Min. |
|
Per
Warming
Drawer
Requirement
NOTE: Install the oven only with specific models listed on the label located on top of the oven.
Per Warming
Drawer
Requirement
1” (2.5 cm) Min. Above Toekick
1” (2.5 cm) Min. Above Toekick or
Adjust to Oven Installation Height
2” (5.1 cm)
Min.
NOTE: Additional clearances between cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior depth and height.
•When installing a Warming Drawer below a single or double oven, a separate 120V, 60 Hz, properly grounded receptacle must be installed. Refer to installation instructions packed with the Warming Drawer for specific installation requirements.
7
