GE Series 90-70 manual Inputs and Outputs Hold Last State

1

Inputs and Outputs Hold Last State

The inputs and outputs of the I/O Link Interface Module will hold their last states if one of the following events occurs:

Hthe link is broken.

Hthe master resets.

Hthe slave resets.

Hthe Series 90-70 PLC is put into STOP mode.

Hthe Series 90-70 PLC is powered-down.

When the disruption is corrected, the module initializes all inputs and outputs to zero, then quickly resets them to their actual states.

GFK±0644A Chapter 1 Introduction 11