1

Getting Started

To install and configure a Series 90±70 I/O Link Interface Module, follow these basic steps:

1. Install the module and complete the I/O Link

Follow the instructions in chapter 2 to install the Series 90±70 I/O Link Module.

After installing the other devices on the link (as instructed in their individual User's

Manuals), complete the I/O Link cabling. This is also described in chapter 2.

2. Add the I/O Link Module to the Series 90±70 PLC Configuration

Follow the instructions in chapter 3 to complete the Logicmaster 90 configuration screen for an I/O Link Interface Module.

3. Select and install an application Program Block from the diskette

Chapter 4 explains how to choose the most appropriate Program Block from an application diskette, and how to add it to a Program Folder.

4. Complete the program logic for the I/O Link Module

This is also explained in chapter 4.

14

Series 90t-70 I/O Link Interface Module User's Manual ± February 1993

GFK-0644A

Page 18
Image 18
GE Series 90-70 manual Getting Started, Install the module and complete the I/O Link