GE UPVH880 installation instructions Reverse Door Handle and Caps

Installation Instructions

3REVERSE DOOR HANDLE AND CAPS

ALay the chrome cover down on a soft, protected, flat surface so that the inner part faces upward (resting on the handle side). Disassemble the door cap from the chrome

cover on the handle side by removing 2 screws (#8 x 0.625″ tapping screws).

2 x D

Screws

Door cap

BDisassemble the inner handle from the outer handle by removing 3 screws (#8 x 0.625″ tapping screws). Disassemble the outer handle

from the chrome cover by removing 4 screws (#8 x 0.625″ tapping screws).

3 x D Screws (inner handle)

Remove
4 x D screws	Outer
(outer handle)
	handle

3REVERSE DOOR HANDLE AND CAPS (CONT.)

CPop the 2 handle caps out toward you and reassemble on the opposite side of the chrome cover, where you removed the outer handle.

Handle caps

DAssemble the outer handle onto the opposite

side of the chrome cover, using 4 screws (#8 x 0.625″ tapping screws).

	Replace
	4 x D
Outer	screws
	(outer
handle
	handle)

37