GE UPVH880 installation instructions Number, Length, Caps

Installation Instructions

EXHAUSTING THE DRYER (cont.)

DUCTING COMPONENT EQUIVALENCY CHART
			EQUIVALENT
			RIGID		NUMBER		EQUIVALENT
		DUCT PIECES	LENGTH	X	USED	=	LENGTH
		Rigid Metal	1 Ft.	X	( )	=	Ft.
		Ducting
DUCTING		(Preferred)
	WALL)	Semi-Rigid	25 Ft.	X	( )	=	Ft.
		Metal Ducting
TRANSITION	(DRYER TO
		(inside diameter
		does not change)
		Flexible Metal	50 Ft.	X	( )	=	Ft.
		Ducting (inside
		diameter changes)
		Elbows (90°/45°)	10 Ft.	X	( )	=	Ft.
		Turns less	2 Ft.	X	( )	=	Ft.
INSIDE WALLS/CEILING		Than 4 Ft.
	(WALL TO WALL CAP)	Less Than 4 Ft.
		Rigid Metal	1 Ft.	X	( )	=	Ft.
		Ducting
		Semi-Rigid	2 Ft.	X	( )	=	Ft.
		Metal Ducting
		Flexible Metal					Ft.
		Ducting Not
		Recommended
		4″ Wall Cap	5 Ft.	X	( )	=	Ft.
		4≤
		(10.2 cm)
CAPS		Louvered Wall	10 Ft.	X	( )	=	Ft.
		Cap
WALL
		2.5″ Wall Cap	23 Ft.	X	( )	=	Ft.
		2.5″
		(6.35
		cm)
			Total Ductwork Length			=	Ft.
		TOTAL MUST BE LESS THAN OR EQUAL TO 150 FT.
			26