GE UPVH880 installation instructions Reverse Hinge and Caps, Assemble the new right-side door cap

Installation Instructions

REVERSING THE DOOR SWING (if desired)

3REVERSE DOOR HANDLE AND CAPS (CONT.)

EReassemble the inner handle to the outer handle, using 3 screws (#8 x 0.625″ tapping screws).

3 x D Screws (inner

Innerhandle) handle

FAssemble the new right-side door cap

(from reversibility kit), using 2 screws (#8 x 0.625″ tapping screws).

2 x D Screws

Door cap

Put the chrome cover aside on a soft, protected flat surface.

4REVERSE HINGE AND CAPS

•Lay the inner door down on a soft, protected flat surface so that the inner part faces up.

•Remove the 2 black plug buttons on the opposite side of the hinge, using a putty knife or thin-blade screwdriver.

•Disassemble the inner door cap from the inner door by removing 2 screws (#8 x 0.75″ tapping screws).

•Disassemble the hinge from the inner door by removing 4 screws (#8-32 x 0.50″ machine screws).

		Inner door
		cap
	2 black	2 x D
Remove	plug buttons	Screws
4 x E screws

Hinge

•Assemble the hinge to the opposite side

of the inner door, using 4 screws (#8-32 x 0.50″ machine screws).

•Assemble the new inner door cap (from

reversibility kit) on the opposite side of the hinge, using 2 screws (#8 x 0.75″ tapping screws).

•Install the 2 black plug buttons on the opposite side of the hinge in the 2 remaining holes.

Hinge

Replace
2 x D	Replace	Replace
screws		4 x E
	2 black	screws
Inner	plug buttons
door cap

38