Design Guide
SIDE PANELS
Side panels must be used whenever the sides
of the unit will be exposed. The 1/4" side panels will slip into the side case trim. Secure the panels to the unit with
the side panels from the cabinet manufacturer.
•Cut a notch in the top front corner as shown to allow clearance for corner keys in the front side trim.
* Depending on | 24" |
| |
installation height. |
|
3/16"
*84"
*3" to 4"
ZUG2 GRILLE PANEL DIMENSIONS
The ZUG2 unified grille panel kit provides
for the installation of a framed or overlay grille panel.
A
|
|
|
|
|
|
|
|
|
|
| Grille Panel |
|
| B | |||
|
|
|
|
|
|
|
|
|
Framed Panel Dimensions | A (Width) | B (Height) | ||||||
|
|
| ||||||
1/4" Framed Panel |
|
|
|
| ||||
Overlay Panel Dimensions | A (Width) | B (Height) | ||||||
|
|
| ||||||
1/4" Backer | Panel |
|
|
|
| |||
0.10" Spacer | Panel |
|
|
|
| |||
3/4" Overlay | Panel | 9" |
|
|
|
|
IMPORTANT NOTE: The maximum weight for the unified grill is 25 pounds.
Overlay Panel
Spacer Panel
Backer Panel
Assemble the overlay panels in the same manner as the door panel.
9