Installation Instructions
STEP 9 INSTALL FRAMED PANELS (TRIMMED MODELS ONLY)
Right hand models shown. Use the same instructions for left hand models.
IF YOU ARE INSTALLING OVERLAY PANELS, GO TO STEP 10A.
Handle | Door Trim |
Trim |
|
| Door |
Use Front Holes to Secure Trim
Use Rear Holes
to Secure HandleStandard supplied handle shown in 1/4" panel position.
Install Door Panel:
•Open the door to 90°. Remove the 6 Phillips head screws from the door handle.
•Remove the handle. Retain all screws.
•Remove the 6 screws holding the trim, lift off the trim. Retain the screws.
•Slide the framed panel into the door trim.
•There are two sets of holes in the handle side trim. Replace the handle side trim by installing the original screws in the FRONT screw holes.
•Secure the handle to the door using the REAR screw holes.
18