Installation Instructions
STEP 9A INSTALL OVERLAY PANELS
Use Front Holes to Secure Handle
Use Rear Holes to Secure Trim
Right hand models shown. Use the same instructions for left hand models.
Door Trim
Handle
Trim
Door
Move
Forward
For 3/4"
Panel
Install Door Panel:
•Open the door to 90°. Remove the 6 Phillips head screws from the door handle.
•Remove the handle. Retain all screws.
•Remove the 6 screws holding the trim, lift off the trim. Retain the screws.
•Slide the overlay panel into the door trim.
Supplied handle shown
in the overlay panel position.
•There are two sets of holes in the handle side trim. Replace the handle side trim by installing the original screws in the REAR screw holes.
•Secure the handle to the door using the FRONT screw holes.
Custom Handles
If you are using custom handles, the handle must
be properly secured to the panel before sliding the panel into the trim.
•The cabinet manufacturer will supply the custom handle and hardware.
•Secure the door trim using new handle side trim. Discard the supplied handle.
19