GE Monogram Built-In All-Refrigerator/Freezer Customization Basics, Trimmed Models, Framed panels

Design Guide

CUSTOMIZATION BASICS:

Framed Or Overlay Panels, Custom Handles and Accessory Kits

Professional Style Stainless Steel Models

Stainless steel wrapped refrigerators have beveled edges and professional-style handles. These models are shipped ready for installation.

Stainless Steel Wrapped Models

Stainless Steel wrapped models have wrapped doors and grille panel, beveled edges, and tubular stainless steel handles that coordinate with other Monogram appliances. These models are shipped ready for installation.

Trimmed Models

Trimmed models are designed to be customized with decorative panels. Field installed custom door and grille panels are required.

Framed panels

You may install 1/4" thick custom panels from

your cabinet manufacturer. The decorative panel slides into the factory installed trim. Or, order black and stainless steel accessory panels from your Monogram dealer.

Overlay panels

You may also choose to install custom overlay panels from your cabinet manufacturer. This design provides a seamless appearance which integrates smoothly with surrounding cabinetry.

	3/4" Overlay Panel
Standard	.10" Thick Spacer Panel
Door Handle	1/4" Thick Backer Panel

Standard supplied handles shown in 3/4" overlay panel position.

Door Handle

The standard supplied handles can be adjusted

to accommodate both framed or overlay panels. Custom handles of your choice, supplied by your cabinet maker can also be installed on overlay panels. If desired, you may order ZKHSS2 Monogram stainless steel tubular handle kit for 3/4" overlay panels. This kit contains

2 handles. Only 1 kit is needed if installing these units as a pair.

Standard Door Handle	Framed Panel	Side Panels
Standard supplied handles shown in 1/4" panel position.		Side panels must be used whenever the sides
		of the product will be exposed.

Optional Accessory Kits

•ZKHSS2: Monogram Tubular Stainless Steel handles designed to fit 3/4" overlay panels.

•ZKHPSS: Pro Tubular Stainless Steel handle designed to fit 3/4" overlay panels.

•ZUG2: For side-by-side installation of two trimmed models. This kit provides for the installation of a unified custom grille panel to span the width of two units using a framed or overlay panel.

•ZUGSS2: For side-by-side installation of two stainless steel wrapped models. This kit provides a unified stainless steel grille panel to span the width of two units.

Accessory Panels

Black and stainless steel accessory panels are available from your Monogram dealer. Panels are cut to size and ready to install.

ZPBS360–Black

ZPSS360–Stainless

7