GE Monogram Built-In All-Refrigerator/Freezer 1/4 FRAMED PANEL DIMENSIONS, Design Guide

Design Guide

1/4" FRAMED PANEL DIMENSIONS

If you choose to install framed panels, they must be cut to the dimensions shown. The panels will slide into the frame on the door and grille.

If the custom panel is less than 1/4" thick and if it fits loosely in the door frame, it can be backed up with a piece of filler material or foam tape to improve the fit.

IMPORTANT NOTE: Maximum weight for door panel

is 67 pounds. Maximum total weight for assembled grille panel is 11 pounds.

Door

5/16" Trim Reveal

1/4" Panel

A

Grille Panel

Door

Panel

	Framed Panel Dimensions
B				A (Width)	B (Grille Height)	C (Door Height)
			1/4" Framed Panel	33-7/8"	8-7/8"	69-5/16"
	Overlay Panel Dimensions
C				A (Width)	B (Grille Height)	C (Door Height)
		1/4" Backer Panel		33-7/8"	8-7/8"	69-5/16"
		0.10" Spacer Panel		32-1/2"	7-5/8"	67-15/16"
		3/4" Overlay Panel		34-1/8"	9"	69-9/16"

3/4" OVERLAY PANEL DIMENSIONS

For a more custom appearance, overlay panels may be installed on trimmed models. The overlay panel must be secured to a 1/4" thick backer panel which slides into the trim. A spacer panel 0.10" thick must be placed between the overlay and backer panel.

IMPORTANT NOTE: Maximum total weight for assembled door panel is 67 pounds. Maximum total weight for assembled grille panel is 11 pounds.

Assemble the panels with glue and screws.

• Center the spacer panel on the backer panel, left to

right and top to bottom. Secure the panels with glue.

• Center the spacer and backer panel on the overlay

panel and secure with glue and screws. Screws must

Door

1/4"

Backer

Panel

Overlay

Panel

.10 Inch

Spacer

Overlay Panel

Spacer Panel

Backer Panel

be countersunk into the backer panel.

NOTE: Left-to-right offset is not always equal to top-to-bottom offset.

8