Step8
Install
Filters
Check
Operation of
Downdraft
Installation
G a s Downdraf t Cooktop
To raise the vent, turn the VENT knob to
RAISE/LOWER.
•Hold the knob until the vent begins to raise.
–The vent will automatically stop when it is fully extended.
•Tip filter into the opening and pull straight down so that the filter rests on slides.
•Slide the filter to the right side.
•Tip the other filter into the opening and pull straight down.
•To turn the fan on, turn the FAN knob to HIGH.
–Continue turning the FAN knob to select
a fan speed between HIGH and LOW. Note: It is not necessary to turn the fan OFF before lowering the vent. The fan will auto- matically turn off when the vent is lowered. When the fan is not turned off before lower- ing the vent, it will automatically come on at the previously selected speed when the vent is fully raised.
To lower the vent, turn the VENT knob to RAISE/LOWER. Hold the knob until the vent begins to lower.
13
