JXBC57 Kit
For Outdoor Remote Blower Locations
Step5
Connect Electrical
•Use electrical cable and connectors that conform to local codes (14 gauge min. is recommended). Use a length to reach between the vent and the blower/motor location.
•Attach the wire box removed from the blower conduit to the end of new wiaring.
•Use wire nuts to secure the wire to the 3" remaining wires with plug.
•Insert the plug into the mating plug on the vent.
•Reinstall wire box with original screws.
Plenum
Provided
Mounting
Screws
Blower
Wire
Box
Connectors
Wire Nuts
Wiring to Blower Junction Box
Step6
Mount
Blower
Step7
Finalize Installation
•Mount the blower onto the mounting plate. Secure with original nuts.
•Install damper to bottom of outlet with 4 screws.
•Place the cover over the the assembled kit and secure with 16 screws.
20
