Gefen EXT-DVI-16416 manual Parameters Param1 Input

RS-232 SERIAL CONTROL COMMANDS

S Command

The S command routes a single input to all 16 DVI outputs.

Syntax:

s param1

Parameters:
param1	Input	[0 - 16]

Notes:

Setting param1 to a value of 0 will place the matrix in one-to-one mode. This means that Input1 will be routed to Output1, Input2 will be routed to Output2, and so on.

M Command

The M command displays the current routing status of the matrix.

Syntax:

m

Parameters:

None

16