FRONT PANEL DISPLAY
ROUTING 
To route sources to a display:
Starting at the standby screen, press the SELECT button. The display selection screen will now be displayed:
On this screen use the ◄ or ► buttons to select the desired display that will have a source routed to it in the next step. Once selection is complete press the SELECT button to confirm the selection. To cancel this operation at this time press the CANCEL button.
Once the display has been selected and confirmed, the source can then be chosen which will be routed to the selected display. The following is the source selection screen:
On this screen use the ◄ or ► buttons to select the desired display that will be routed to the display selected in the previous step. Once selection is complete press the SELECT button to confirm the selection. The selected source will now be routed to the selected display. Once the routing is complete, the user will be returned to the standby screen. To cancel this operation at this time press the CANCEL button.
8
