Gefen EXT-DVI-16416 manual RMT-16416IR Remote Description, Routing Sources to Displays

RMT-16416IR REMOTE DESCRIPTION

RMT-16416IR

1

2

1LED Button Press Indicator

This LED will activate momentarily upon each button press. This visual indicator is to inform the user that a command has been sent by the IR remote control.

2Display and Source Selection Buttons

These buttons will be used to send display and source selections to the 16x16 DVI Matrix.

Routing Sources to Displays

Issuing a routing command is a two step process. The first step will be to select a the display (1-16) which a source will be routed to in the next step. Once the display has been entered, the source can then be selected. Select the source (1-16) which will be routed to the display selected in the previous step. For example, to route the source connected to input 6 to the display connected to output 4 the input steps would be the following:

1Press button 4 (display) on the RMT-16416IR remote control.

2Press button 6 (source) on the RMT-16416IR remote control.

3The source will immediately be routed to the display.

9