Genicom P45 user manual English IrDA and Serial COM Connectors, IrDA Connector

E

English

English

IrDA and Serial (COM) Connectors

			IRRX
	N. C.				Ground
VCC						IRTX
1							5 X
				IrDA
		RD	DTR DSR CTS

COM 12 9 W

RI

RTS

GND

TD

CD

IrDA Connector

This connector is used to connect an IrDA module.

Note:

The sequence of the pin functions on some IrDA cable may be reversed from the pin function defined on the system board. Make sure to connect the cable connector to the IrDA connector according to their pin functions.

You may need to install the proper drivers in your operating system to use the IrDA function. Refer to your operating system’s manual or documentation for more information.

Serial (COM) Connector

The serial (COM) connector is used to connect modems, serial print- ers, remote display terminals, or other serial devices.Your COM port may come mounted on a card-edge bracket. Install the card-edge bracket to an available slot at the rear of the system chassis then connect the serial port cable to this connector. The colored edge of the cable should align with pin 1 of this connector.

20