Genicom P45 user manual +5V +12V Ground

E

English

English

The power connectors from the power supply unit are designed to fit the 24-pin and 8-pin connectors in only one orientation. Make sure to find the proper orientation before plugging the connectors.

The FDD-type power connectors are additional power connectors. If you are using more than one graphics cards, we recommend that you plug a power cable from your power supply unit to the 5V/12V power connector. This will provide more stability to the entire system. The system board will still work even if the additional power con- nector is not connected.

1

4

+5V +12V Ground

Ground

The system board requires a minimum of 300 Watt power supply to operate. Your system configuration (CPU power, amount of memory, add-in cards, peripherals, etc.) may exceed the minimum power requirement. To ensure that adequate power is provided, we strongly recommend that you use a minimum of 400 Watt (or greater) power supply.

Important:

Insufficient power supplied to the system may result in instabil- ity or the add-in boards and peripherals not functioning prop- erly. Calculating the system’s approximate power usage is im- portant to ensure that the power supply meets the system’s consumption requirements.

24