
Operator’s Manual | Third Edition • First Printing |
|
|
|
|
OPERATING INSTRUCTIONS
Emergency Stop
Push in the red Emergency Stop button at the platform controls or at the ground controls to stop the up function.
Platform Raise and Lower
1Pull out the red Emergency Stop button to the on position at the ground controls. Twist to release the red Emergency Stop button at the platform controls.
2Push in the control activate button and rotate the up/down switch in the desired direction of travel.
Manual Lowering
1Activate the manual lowering valve located at the bottom of the
hydraulic cylinder.
Auxiliary Platform Lowering - AC & DC Models
1Turn the key switch to ground control. Pull out the red Emergency Stop button to the on position.
2Activate the auxiliary platform lowering button at the ground controls.
Fall Protection
Personal fall protection equipment (PFPE) is not required when operating this machine. If PFPE is required by job site or employer rules, the following shall apply:
All PFPE must comply with applicable governmental regulations and must be inspected and used in accordance with the manufacturer’s instructions.
After Each Use
1Select a safe storage
2Chock the wheels to prevent the machine from rolling.
3Remove the key to secure from unauthorized use.
4DC models: Recharge the battery.
20 | Genie AWP Super Series | Part No. 114002 |