Operator’s Manual | Third Edition • First Printing |
|
|
|
|
SAFETY RULES
Electrocution Hazards
This machine, even with an optional fiberglass platform, is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
Keep away from the machine if it contacts energized power lines or becomes electrically charged. Personnel on the ground or in the platform must not touch or operate the machine until energized power lines are shut off.
Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart.
| Minimum Safe | |
Voltage | Approach Distance | |
Phase to Phase | Feet | Meters |
0 to 300V | Avoid Contact | |
Allow for platform movement, electrical line sway or sag and movement due to strong or gusty winds.
Do not use the machine as a ground for welding.
Do not operate an AC powered machine or a DC battery charger unless using a
Tip-over Hazards
Do not raise the platform unless the base is level, all four outriggers are properly installed and the leveling jacks firmly contact the floor.
Do not adjust or remove the outriggers while the platform is occupied or raised.
Do not move the machine while the platform is raised.
300V to 50KV | 10 | 3.05 |
50KV to 200KV | 15 | 4.60 |
200KV to 350KV | 20 | 6.10 |
350KV to 500KV | 25 | 7.62 |
|
|
|
500KV to 750KV | 35 | 10.67 |
|
|
|
750KV to 1000KV | 45 | 13.72 |
|
|
|
Do not place ladders or scaffolds in the platform or against any part of this machine.
Do not place or attach overhanging loads to any part of this machine.
Do not transport tools and materials unless they are evenly distributed and can be safely handled by the person in the platform.
2 | Genie AWP Super Series | Part No. 114002 |
